Muzzle Devices
Flash Hiders
- Materials: Steel/Titanium
- Finish: Black Oxide (Steel)/Raw (Titanium)
- Types:
- Short/Thin (0.750” diameter)
- Long/Thin (0.750” diameter) — Suitable for 14.5 inch barrels
- Thick
* Available with pre-drilled hole for pinning
Muzzle Brake
- Materials: Steel/Titanium
- Finish: Black Oxide (Steel)/Raw (Titanium)
- Types:
- Long (0.750” diameter) — Suitable for 14.5 inch barrels
* Available with pre-drilled hole for pinning
Barrels
Barrel: 16 Inch Hybrid Profile
- Chamber: .223 Wylde
- Material: 4150 CMV, 416R Stainless Steel
- Gas System: Mid Length Gas System
- Thread: ½-28 Thread
- Twist: 1-8 RH Twist
- Finishes: Chrome Lined/Parkerized, Stainless Steel, Salt Bath Nitrided
Barrel: 14.5 Inch Hybrid Profile
- Chamber: .223 Wylde
- Material: 4150 CMV, 416R Stainless Steel
- Gas System: Mid Length Gas System
- Thread: ½-28 Thread
- Twist: 1-8 RH Twist
- Finishes: Chrome Lined/Parkerized
* The above barrels are currently in service with the US Army Marksmanship Unit Action Shooting Team (1518S-HY12) and the US Marine Corps Combat Shooting Team (1516S-HY8-N)
Barrel: 16 Inch Ultralight “Government” Profile
- Chamber: .223 Wylde
- Material: 4150 CMV, 416R Stainless Steel
- Gas System: Mid Length Gas System
- Thread: ½-28 Thread
- Twist: 1-8 RH Twist
- Finishes: Chrome Lined/Parkerized
Barrel: 20 Inch Fluted Profile
- Chamber: .223 Wylde
- Material: 416R Stainless Steel
- Gas System: Mid Length Gas System
- Thread: ½-28 Thread
- Twist: 1-8 RH Twist
- Finishes: Chrome Lined, Stainless Steel, Salt Bath Nitrided
Grips
Ergo Sure Grip
- Overmolded grip with integrated rear upper extension to support the web of your hand
- Rhino Hide Texture
Ergo Sure Grip
- Overmolded grip with integrated rear upper extension to support the web of your hand
- Rhino Hide Texture
- Slightly thinner than the Ergo 1
Handguards
FIMS Proprietary M-Lok Handguard
- Material: 6061-T6 Aluminum
- Available Lengths: 7, 7.86, 9, 9.4, 11, 13.5, 15, and 16.6 inches
Stocks
Ergo F93
- 8 Position Stock
- 2 QD Attachment Points
- 3 Web Sling Attachment Points
- Length of pull adjustable between 8–12 inches in 0.5 inch increments
- Removable Rubber Butt Plate
- Optional Strike Plate
- Colors: Black, Tank, Grey, OD Green
FIMS Dog Leg Aluminum Stock
- Material: 7075 Aluminum
- Can be made with any Length of pull between 8 and 16 inches
Bolt Carrier Group
- Carrier: 8620 Steel, 6A1-4V Titanium
- Bolt: Carpenter 158
- Finish: Nickel Boron Plated (Carpenter 158), Raw (Titanium)
- Gas keys staked to government specifications
- All BCG assemblies are MPI inspected and carry a lifetime warranty.
Buffer Weight
- Available in H1, H2, H3 weights. For a proper functioning rifle we will select the proper weight for the application.
Buffer Weight
- Material: 6061 aluminum with steel locking pall and a coated stainless steel spring
- Available in ambidextrous, single side, side latch
Gas Block
FIMS Standard Non Adjustable Gas Block
- Materials: 4340 Steel, Titanium
FIMS lightened Non Adjustable Gas Block
- Materials: 4340 Steel, Titanium
Triggers
Timney competition trigger
- Weight: 4 lbs
- Profiles: Curved, Straight
Hyper Fire
- 243G Trigger/24C Trigger
Magazines
- Hexmag composite 10 round, 15 round, 30 round
- Colors: Black, Grey, OD Green, Tan Translucent
FIMS Extreme Strength AR15 Receiver Set
- Material: 7075-T6 Aluminum
They say every AR is the same. The truth is, they’re not. While many focus solely on removing weight while sacrificing integrity, we have focused on increasing strength. By adding less than two ounces of material to both the upper and lower, we have strengthened all potential crush points of the AR. Leaving the user with a gun that will shoot groups and is rugged enough to depend on in any circumstance. The sleek design has the elegance of a runway model, and the strength of a rhino.
- Convertible to Bolt-Action from Semi-Auto, Convertible to Semi-Auto from Bolt-Action. Completely Reversible (Patent Pending)
- Machined from 7075-t6 aluminum on HAAS 5-axis CNC machines
- Unsurpassed Strength
- Large Combat Flared Magwell
- Low Drag Melted Exterior
- Receiver set comes with profile matched stainless steel take-down pins along with a profile matched endplate. Feel free to upgrade to titanium.